
How to Preserve a 1914-D Lincoln Cent XF40 CAC: Toning, PVC, Holders, and Cleaning
October 4, 2026
How to Preserve the 2026 Diamond Field Morgan and Peace Dollar Two-Coin Set: Toning, PVC, Holders, and Cleaning
October 4, 2026Can a 1914-D Lincoln cent become a ring? Not every coin should. In my coin-ring workshop, I begin every jewelry inquiry with three questions: What is the coin made of, how will its design hold up when worn, and can I transform it without sacrificing the features that give it numismatic value? A setting can protect the cent. A cutout can erase it.
For the 1914-D Lincoln cent featured in our forum discussion, the material answer is clear: the coin contains no silver. It is a 95% copper, 5% nickel cent. The example revealed in the thread was identified as XF40 CAC. Here, XF40 describes its circulated surface grade, while the CAC sticker is a marketplace grading designation—not a statement about precious-metal content.
As a miniature sculpture, the 1914-D has strong eye appeal. Its warm copper-nickel color, Lincoln portrait, and paired wheat stalks give it real potential as a ring or pendant. That design potential is part of its collectibility. Yet the relief, patina, and original surfaces that make it appealing can never be replaced once the coin is cut. For a century-old cent, my preferred outcome is a reversible, non-destructive setting rather than a cutout ring.
The Material Check: A 1914-D Lincoln Cent Has No Silver
Before I design a setting, I verify the alloy. A factory-issued 1914-D Lincoln cent was struck in copper-nickel—not .900 “coin silver,” .800 silver, or sterling silver. Its published specifications are:
- Composition: 95% copper and 5% nickel
- Weight: 2.50 grams
- Diameter: 19.05 millimeters
- Thickness: approximately 1.55 millimeters
- Edge: Plain
- Denomination: One cent
- Mint: Denver, identified by the D on the reverse
The nickel was blended into the copper to improve strength and manufacturing performance. It did not give the cent a silver core, and 5% nickel should never be confused with silver fineness. A coin may appear bright because of its luster and reflected light, but visual brightness is not a metal test.
Plating raises a separate concern. If someone later coats the cent with silver, that is an alteration and must be disclosed. Unless a reputable jeweler or refiner performed and documented the work, the plated piece should not be sold as an original copper-nickel cent. Even properly documented plating remains a surface layer; it does not give the 19 mm coin a silver core, and it changes the original surfaces collectors prize.
In my experience, the words “coin jewelry” and “silver coin ring” are used too loosely in online marketplaces. A ring may hold an original copper-nickel coin, a plated base-metal replica, or a .925 silver setting surrounding a copper-nickel cent. Those are three very different objects, with three very different values.
I therefore ask collectors and sellers to describe each component separately. A “sterling silver bezel-set 1914-D Lincoln cent ring” means that the bezel is silver while the cent remains copper-nickel. Calling an original coin “fine silver” is simply inaccurate. A modern reproduction may be made in fine silver, but it must be identified plainly as a reproduction. That precision protects provenance, buyer trust, and long-term collectibility.
What the Forum’s XF40 CAC Grade Means for Crafting
The forum discussion centered on whether the coin should grade AU50, AU55, AU58, or even low Mint State. When it was identified as XF40 CAC, the apparent lack of original mint luster became central. At XF40, it does not qualify as mint condition. One commenter interpreted the CAC sticker as confidence that the coin might deserve XF45, while another correctly noted that the precise reason for the sticker had not been documented. I agree with the second reader: a sticker cannot replace a clear condition report.
That distinction matters in both numismatics and jewelry planning. XF40 is a grade; CAC is a marketplace designation; neither changes the alloy. The cent is copper-nickel. When I evaluate a coin like this, I weigh the strike, remaining luster, patina, surface integrity, eye appeal, and provenance separately. Age or a CAC sticker alone does not establish that it is a rare variety or justify a higher valuation. My conclusion? Yes, the 1914-D can be crafted into a handsome ring or pendant. For this XF40 CAC example, though, I would choose a reversible bezel ring or pendant mount, preserve the original surfaces, and let the genuine 1914-D design carry the piece.
Related Resources
You might also find these related articles helpful:
- How to Preserve a 1914-D Lincoln Cent XF40 CAC: Toning, PVC, Holders, and Cleaning – I’ve seen too many collectible coins ruined by well-intentioned cleaning or careless storage. A single wipe with a…
- 1914-D Lincoln Cent Grading Breakdown: Why This XF40 CAC Looks Like an AU58 – Condition is everything once rarity has brought a coin into your collection. On a Lincoln cent, I start with wear: the h…
- Can You Still Find Raw Coins Worth Submitting to PCGS at Flea Markets and Pawn Shops? – Can you still find raw coins worth submitting to PCGS at flea markets and pawn shops? Yes—but the hunt has changed. The …








